this car comes with a 2.3Liter Mazda Atenza engine 151hp 154ft Lbs.
VARIABLE VALVE Timing 4700RPM, 6750 STOCK REV Limit. 123MPH Limit
They run 15.7 @???MPH Stock Weigh 2639Lbs Dry.

I have Cosworth Stage 1 Cams,
Cosworth ECU FLASH 1, More fuel, more timing, less mpg :cry:
STEEDA Short Ram
SVT Focus Muffler
Compucar 50hp Nitrous (Dry) Crappy but cheap and effective. 75 and 100 Hp jets available but I need a fuel pump, inj. and a maf sensor/Flash.
best time was 13.49 @ 102MPH on Slicks borrowed from a friend.
Unfortunetly u can't run that good and hold together.
I'm on my 2nd clutch and axles *Replaced under warranty* :lol:

http://www.kodakgallery.com/ShareLandingSi...Dfromshare&Ux=0

Just from those pictures my car is alot different now.
I just shaved off the trunk emblem over the license plate.
That is the part the would have had the Ford Oval and the keyhole in it.
It is now perfectly flush and badgeless.
I just received the European ST Badge that I'm going to put on the trunk
I just meshed in the lower grille with that APC mesh after I got it powdercoated. For some reason even after priming regular paint chips off. It probably needed a sand blast.

I Order 215-40-16 tires for the stock rims with I'm going to powdercoat black. I got the Eibach anti-roll kit and the Energy Bushings for the whole car. Also there is a rear shock tower bar I'm getting. I stripped the solenoid for the nitrous system so when that comes in I be quick(er) again.

I'm changing the THEME of the car from STEEDA to Cosworth because I'm going for the better parts that Cosworth offers over Steeda.
I'm going to delete the turn signals in the bumper and am meshing in the back bumper.

On ORDER..........From Cosworth
Stage 2 camshafts
Header w/flex Pipe 1 7/8" Primaries, 2.5" Flex
Full Stainless Cat Back 2.5" Piping
Barrell Style Intake Manifold
67MM Throttle Body
6-Puck Clutch
9.75lb. Flywheel
Balance Shaft Delete Kit
3.25" Intake Long Tube w/Bypass

I'm sure I'm missing something but that's the big ticket items.

All said and done they claim it'll have about 230 and 205Ft lbs.
I'll have to see that to believe it

My car is slow off the bottle but I don't mind running em' for fun.
I'm mostly into autocross but I'm still doing the suspension

clean focus...also like the idea of the keypad under the mirror...

is that the plug and spray focus edition (everything there but the bottle) ?

I thought that was the Saleen Focus. Correct me if I am wrong

has a few pop up's but nothing bad

http://www.fast-autos.net/saleen/saleenfocus.html

So I was right, woohoo, I remembered something, maybe I am not so old after all :lol:

that's Compucar's Nytrous In a Bag. That's how they spell it. NYTROUS.

Single solenoid 12v power to cigarette lighter plastic line into intake.

Crappy but effective.

Those SALEEN FOCUS's look a little gawdy and I bet with the 2.0 in them they are still weak.

Just a question also how fast is a Zetec 5 Speed car stock ZX2 or Focus?

did you look at his pictures oldy? says steeda all over his car! lol

steeda renames alot of other brands and sales them as there parts... thats one major thing I hate about them.

Cosworth on the otherhand..is the shit.

a local around my area in a zx2 with dual cam gears, udp, and s/r stuff ran a 15.3

I dunno what I run, for that matter I havent been to the dyno for a while either. But last I was there on a slipping clutch and an intake, udp, and s/r comp I made 124whp and matching torque...I have since added every 'easy' bolton available. I have everything for my new clutch and flywheel as well. And a full suspension sitting around too...Im lazy. Oh yea and dual cam gears to remove the shitty assed vct.

Yeah I do like the Cosworth stuff alot more. But they don't provide k/y along with the prices. I guess u pay for the quality.

I was talking about the nitrous edition being the saleen. you whippersnapper

Updated pics of new body mods coming soon.

http://www.kodakgallery.com/Slideshow.jsp?...110.35662533110

New stuff
Shaved trunk where Ford badge mounts to and the keyhole
Molded in turn signals completely deleted
Meshed in lower bumper with powdercoated mesh.
Windshield banner now says COSWORTH\


Give me a day or 2 to get the new pics up.

im confused, i thought this was a post about the new focus, its a post about your work to your car. its nice stuff, just thought i was looking at something new

I wrote that wrong. These are the old pics and the new ones are coming soon.
BTW are any of u guys cruising friday???

we are discussing this in another thread, but the concensus so far is we are cruising/meeting up on saturday

stop editing all of your post (especially the orginal one) or I'm taking away your editing privileges.

your talking to cosworth i assume

Correct, sorry for not clarifying

not trying to be an ass but why??
Bandwidth??
Whatever what's the correct way to do it then>>>

just post, dont keep editing one post. Got more info to throw out there..post it , if its within a certain time frame the forum will add it to your previous post, if its not..then it will make a new post. Everytime I've looked at your orginal post its changed.. I dont want to keep having to read a entire thread if EVERYONE is going to start editing there post. Use editing for smaller stuff, spelling, fixing links, etc