Help - Search - Members - Calendar
Full Version: Msd Dis-2
KcTuners > Mechanics Corner > Performance Electronics
inis
I just won a msd dis-2 on ebay for alittle over 100.00 w00t, they go for 360!
jdrzx2
what's a dis 2?
venom620
distributorless ignition system X2!!!!!!!!11 BOOYAH!!!!
inis
msd dis-2 capative discharge ignition system.

Means I will get a better spark, I can change my max revs, I can create a low rev (for staging at a low light), retard timing..and some other features...
jdrzx2
i didn't know they made anything like that for the zetec, i think i want to get one of those.
inis
355.00 brand new down.gif
arden
free if your at jarreds house when the package arrives tongue.gif
b-rad
QUOTE (arden @ Mar 16 2006, 03:24 PM) *
free if your at jarreds house when the package arrives tongue.gif

biggrin.gif yay...i'll get there first, lol
jdrzx2
i remember where he lives ninja.gif
Jeremy S.
Eh, it cant go higher in max rev's then the stock computer goes. It doesn't override the stock computer rev limiter.
inis
QUOTE (Jeremy S. @ Apr 23 2006, 11:05 PM) *
Eh, it cant go higher in max rev's then the stock computer goes. It doesn't override the stock computer rev limiter.


I wont have a rev limiter on the pcm I install along with the dis-2. I'll use dis-2 to make a max rev, and a soft rev.
jdrzx2
how does this work
inis
yay got the last part for my dis-2 install. Yes this is a cheater wire, but hey it makes it look nice, and easier to install.

http://kctuners.com/members/inis/8881.JPG

last thing I gotta do is get some 12 gauge wire, and 2 switches one push button (2 step), and one toggle (for ignition kill switch)

I look to be putting this in thur or fri.
arden
hmm, well good luck. i will wait and see how yours turns out before i invest in a new ignition
inis
All wired up, ready to drop in install.

I'll do a write up and a review after I'm done.
Godzilla
I sure liked mine until it went kaput sad.gif
inis
oh wow I really like it, took all the surges, stutters, on/off feeling away, WAY smoother, I also got the soft rev working ..I likely that too. Sounds better too, I wanna say more motorcycle/f1 like sound, Not exactly deeper, but smoother and deep like before.

Overall I give it a 9, I'd give it a 10 but I had to get the tach adapter to get it to work, which isn't to exciting

Part number:
Dis-2 6211, 62112,6212 (300.00 +)
Tach Adapter: 8912 (65ish)
Coil by pass plug: 8881 (30ish)

I like the set up very well, all those prices I listed are new, you can get them cheaper watching ebay, but I couldn't ever find 8881 used...cfm motorsports has it the cheapest.
Godzilla
I noticed very similar gains with mine. was very helpful when tuning the nitrous.
street_tuner87
so did the wire i gave ya work?
Ricer Hater
QUOTE (street_tuner87 @ Jul 21 2006, 06:01 PM) *
so did the wire i gave ya work?


yea the dis-2 is very nice! Although, I havent played with the low rpms launch limiter yet. Im thinking about hooking that wire to my clutch switch, so when i push the lcutch to the floor, itll do the limiter, instead of wiring it up to a switch, whatcha think?
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2012 Invision Power Services, Inc.