1.25 cubic foot
25 sq inches of port, port legnth is 48.5", roughly tuned to 32-34hz

For 2 re8s

Box will be mounted on the one of my false walls. Box will be pretty standard. I have an idea to make the wall portion out of birch ply. Stain the birch ply and cut out the kctuners.com logo into the carpet to reveal the stained birch beneath

I've been given some room to work I guess :P .

Whole thing when done might weigh about 100lbs

I knew you were the one to ask. :)

UPDATE

So my good buddy doesn't like the crooked sub design. Since it is for him and not me I designed another box. Similiar but different

This one is a lot longer, a little deeper, and a little shorter

1.25 cubic foot
26.125 sq inches of port(2.75" wide x 9.5" tall)
50.75" long port

Still tuned to 32-34hz

what do you do to determine the port configuration? like to tune it and how long and all that.

I don't have time to write it all out but here is a good informational post on caraudio.com

http://www.caraudio.com/forum/showthread.php?t=215849