ok so this is my first mtx vehicle. i need to know when changing the flywheel and clutch what else do i need to change.

and are horsepowerfreaks or escort/focus good sites to order parts from.

this is the clutch:
http://www.horsepowerfreaks.com/price/Ford...ith_Street_Disc

this is the flywheel:
http://www.horsepowerfreaks.com/price/Ford...heels/Flywheels

fluid, pilot bearing, and throw out bearing. Also baby the clutch for a couple thousand miles.

You are buying a performance clutch, flywheel, and exhaust?

i have open exhaust after the motor right now, it rusted off and all i did was take the stuff behind it off. i plan to have it piped out the passenger side infront of the rear tire.(bad idea?) but if i can find a header that fits thats used or something then i will be putting a header on it too. does the clutch kit that the link goes to include the pilot bearing? it looks like a bearing is included but i dont know which one it is.

it should include the bearings but not all do...So Im not going to say either way. My spec came with a throwout and a bearing which is unidentifiable. Pilot bearings are like 15 bucks. Throwouts are like 35

pilots are tiny, thin wall, long bearings. They are pressed in and are a real bitch to get out. Make sure they are greased well.

Throwouts are generally pretty noisy when you first install them but they set in so to say after a while....I wouldn't grease these...

I think I am getting a centerforce for my next clutch